AND UA-767 Plus BT Buku Petunjuk - Halaman 10

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Monitor Tekanan Darah AND UA-767 Plus BT. AND UA-767 Plus BT 17 halaman.

Halaman Cetak

Model UA-767

cuff to a systolic pressure level automatically.

If your systolic pressure is expected to exceed 230 mmHg or you use the

optional small cuff, read "Measurement with the desired systolic

pressure" on the next page.

Normal Measurement

Place the cuff on the arm (preferably the left arm).

Sit quietly during measurement.

Press the

START

The last data of systolic and diastolic

pressure and pulse rate are displayed

briefly. Then the display changes, as

indicated in the figure at the right, as the

measurement begins. The cuff starts to

inflate. It is normal for the cuff to feel very

tight. A pressure bar indicator is displayed,

as in the figure at the right, during inflation.

Note: If you wish to stop inflation at any time,

press the

When inflation is complete, deflation starts

automatically and the

blinks, indicating that the measurement is

in progress. Once the pulse is detected,

the mark blinks with each pulse beat.

Note: If an appropriate pressure is not

obtained, the device starts to inflate

again automatically.

When the measurement is complete, the

systolic and diastolic pressure readings and

pulse rate are displayed. The cuff exhausts

the remaining air and deflates completely.

Press the

off the power.

Note: Model UA-767

shut-off function. Allow at least three minutes between

measurements on the same person.

Measurements

BT is designed to detect the pulse and to inflate the

button.

button again.

START

button again to turn

START

BT is provided with an automatic power

(heart mark)

Systolic pressure

Diastolic pressure

English 9

At heart level

button

START

The last data

at initial display

Starts inflation

Pressurizing

Measurement

in progress

Pulse rate

Exhausts remaining

air automatically