Carman AUTO-i 700 Panduan Cepat

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Peralatan Diagnostik Carman AUTO-i 700. Carman AUTO-i 700 4 halaman.

AUTO-i 700 Quick Guide

1. Power Button: Keep pushing this button until screen turns on. It takes around 1 second.

(Do not press too strongly. it can cause this button broken.)

2. Touch Pen: Keep a touch pen in a hole.

3. DLC:Port for DLC main cable.

When connecting, if it sounds 'clack' on connector, then, it becomes connected well.

4. RJ45: Port for ethernet communication. Just now, it is not available. Later, it will be updated.

Do not use an internet cable. (It is now blocked with a sticker. When use, remove the sticker.)

5. RS232: Port for TPMSto read sensor values or to code by our TPMS a transmitter-receiver.

Just now, It is not available. Later, it will be updated.

6. DC12V: Port for a power adapter or cigar jack for power.

7. USB mini B : It is not available for user. (Your connecting can cause damage of the scanner.)

8. J2534 : Port for J2534 communication. It is not available. Later, it will be updated.

9. USB-B TYPE: USB port to PC for update the scanner and data.

Use our USB cable supplied with our scanner.

10. HDMI: Port for HDMI to other external monitor. Not available. Later, it will be updated.

11. USB-A TYPE: USB port for other external devices such as USB memory stick etc.

12. Forced termination button: Press this button when the program hang occurs to turn off the scanner.