Dreame Bot L10 Pro Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyedot Debu Dreame Bot L10 Pro. Dreame Bot L10 Pro 14 halaman. Robot vacuum and mop

Clearing Home Environment

To improve the working efficiency of your robot, put away any loose cords

(including the power cord of the charging dock), rags, slippers, toys, etc.

Open the door of the room to be cleaned, and put the furniture in its proper

place to make more space.

Before cleaning, place a physical barrier at the edge of the stairs and sofa to

ensure safe and smooth operation of the robot.

To prevent the robot from not recognizing the area to be cleaned, do not stand

in the front of the robot, threshold, hall way, or narrow places.

Preparation Before Use

1. Remove the protective matter

2. Install the side brush

Click

Note: Install the side brush until it clicks into place.

3. Place the charging dock on the level ground against the

wall and connect it to a power outlet

＞ 0.5 m

＞ 1.5 m

Note:

• Keep the immediate area 1.5m in front of the charger and 0.5m to both sides

of the charging dock clear of objects.

• To ensure you can connect to the robot with your phone well, make sure the

robot and charging dock are within the range of Wi-Fi.

• Do not place the charging dock in an area with direct sunlight or where other

objects might block the signal, as this may hinder the robot from returning to

the charging dock.

4. Place the robot onto the charging dock to recharge. The

robot will turn on automatically and begin recharging

Battery Level Indicator

• White: Battery level is more than 15%

• Orange: Battery level is less than 15%

Note:

• Fully charge is recommended before first-time use.

• Do not install the mopping module while charging. Be extra careful with the

wet mop as it can damage the floor.