Dreame H12 S Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyedot Debu Dreame H12 S. Dreame H12 S 13 halaman. Wet and dry vacuum

Care & Maintenance

Tips:

1. Turn off the vacuum before care and maintenance.

2. Replace parts if needed. The parts must be replaced by those available from the

manufacturer or its service agent.

3. If the vacuum is not used for an extended period, fully charge it, unplug the power

adapter, and store the vacuum in a cool, low-humidity environment away from direct

sunlight. To avoid over-discharge of the battery, charge the vacuum at least once

every 3 months.

One-Touch Self-Cleaning

* The self-cleaning function can be enabled only when the vacuum is being charged and the battery

level is more than 15%.

1. After the vacuum completes the cleaning task,

place it back onto the base and make sure that

the water in the clean water tank is sufficient for

self-cleaning.

2. Briefly press the self-cleaning button on the top

of the handle, the self-cleaning indicator will

light up, and the vacuum will start self-cleaning.

3. After the self-cleaning ends, the vacuum

continues charging its battery.

Note: After the vacuum completes self-cleaning, clean the used water tank promptly. If some stains

are left on the charging base, clean the base .

Care & Maintenance

Cleaning the Brush Roller Cover

* Clean it as needed.

1. Press the brush roller cover release

buttons at both ends inward to remove

the cover

3. Dry the cover completely before use.

2. Rinse the cover with clean water or

wipe it with a cloth.

4. Re-install the cover back.