AND XL-20 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alat Ukur AND XL-20. AND XL-20 7 halaman. Wireless activity monitor

Using the ActiLink Software

The ActiLink Software will allow

your ActiLink to receive data from

the XL-20. The icon in the Windows

system tray or Mac dock will

indicate the software status.

Good Status:

Everything is working properly and

devices can offload!

Warning Status:

The ActiLink Software does not detect an

Internet connectionand devices cannot

be offloaded.

Error Status:

The ActiLink Software does not detect

your ActiLink and devices cannot be

offloaded.

Page E-5 | A&D Medical (Toll-Free): 1-888-726-9966

System Check List

Below are some helpful hints to ensure your Wellness

Connected System is working properly:

 The computer is powered on and not in Sleep,

Suspended or Hibernation mode

 The ActiLink is plugged into the computer's USB port

 The ActiLink Software icon is blue and visible in your

Windows system tray or Mac dock

 If you still do not see your data on WellnessConnected.

com, try taking another short walk of 200 steps or more

without stopping, return to your computer and click

"refresh page"

 The XL-20 will offload data when it is "awake" and in range

of the ActiLink – the XL-20 is awake when it is on your foot

and you are moving, or if you tap it on a hard surface

To check the status of the XL-20, click on the ActiLink

Software icon and locate your XL-20 in the Registered

Devices list. There are 3 status levels:

Sleeping – the XL-20 is not detecting activity and has gone

to sleep to save battery life

Awake –

the XL-20 is detecting activity, but is not

offloading data

Syncing – The XL-20 is actively offloading data through the

ActiLink Software to Wellness Connected

A&D Medical (Toll-Free): 1-888-726-9966 | Page E-6