AND UT-801 Buku Petunjuk - Halaman 11

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Termometer AND UT-801. AND UT-801 19 halaman. Multi-function infrared thermometer

Measuring temperature in surface mode:

(1) When you press the "SCAN" button, you will get the real time temperature immediately. If you press and hold the "SCAN" button, the

measurement will be continuously updated.

(2) Applications include temperature measurements of water, milk, cloth, skin or other objects.

NOTE

This mode shows actual, unadjusted surface temperatures, which are different from body temperature.

5. After measurement:

(1) Power off:

Device will automatically shut off to extend battery life if left idle for more than 1 minute. The device can only be powered off

automatically. (In surface mode, you can manually turn the power off by pressing ON/MEM" button for 3 seconds.)

(2) Clean the probe after each use to ensure accurate readings and avoid cross contamination. (See the section on "Care &

Maintenance" for details.)

NOTES

▢ This thermometer has been designed for everyday use. It's not meant to replace a visit to the doctor. Please also remember to

compare the measurement result to your regular body temperature. Please consult with doctor if you have health concerns.

▢ Holding the thermometer too long may cause a higher ambient temperature reading of the probe. This could make the body

temperature measurement lower than usual.

English 10