Forms+Surfaces AXIS RECEPTACLE Petunjuk Pemasangan

Jelajahi secara online atau unduh pdf Petunjuk Pemasangan untuk Perabotan Dalam Ruangan Forms+Surfaces AXIS RECEPTACLE. Forms+Surfaces AXIS RECEPTACLE 2 halaman.

Halaman Cetak

AXIS

RECEPTACLE

™

MOUNTING KIT (SOLD SEPARATELY)

STEP BY STEP

TO ATTACH TWO AXIS RECEPTACLES

Insert top attachment plate

• Each Axis Receptacle needs one

attachment plate and four bolts. To

attach two receptacles you will need two

attachment plates and eight screws.

• Insert top attachment plate (b) into

slot along the straight flat end of the

receptacle, below the lid.

• Align holes in top attachment plate with

holes in top receptacle frame.

T 800.451.0410 | www.forms-surfaces.com

© 2021 Forms+Surfaces® | All dimensions are nominal. Specifications and pricing subject to change without notice. For the most current version of this document, please refer to our website at www.forms-surfaces.com.

TOOLS NEEDED

Attach top attachment plate

• Insert 1/4"-20 x 1/2" bolts (a) through

receptacle frame and top attachment

plate to secure top attachment plate to

receptacle.

• Tighten until snug.

ATTACHMENT INSTRUCTIONS

philips head

screwdriver

Insert bottom attachment plate

• Insert bottom attachment plate (b) into

slot along the straight flat end of the

receptacle, below the body and above

the base.

• Align holes in bottom attachment plate

with holes in bottom receptacle frame.

page 1 of 2 | Rev. 12-15-21