ATI Audio MCDA-208/WC106 Panduan Pengoperasian dan Pemeliharaan - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Pemeliharaan untuk Penguat ATI Audio MCDA-208/WC106. ATI Audio MCDA-208/WC106 13 halaman. Ultra-low-jitter studio master clock with dual 1x4 aes/ebu distribution amplifier and 1x6 clock distribution amplifier
Halaman Cetak
AES SYNC IN
Provides a balanced, transformer isolated 110 ohm AES Sync input that a derived Word Clock may be
routed to XLR Outputs 1 through 4, Outputs 5 through 8 or BNC Outputs 1 through 6 via the
configuration DIP switches. A Frame Clock is derived from this input. When present, this signal
provides first priority for synchronizing the internal Clock Generator when CLOCK SOURCE SET is set
to BY PRIORITY.
AES LOOP-THRU
Provides a convenient loop-thru port for the AES External Sync input. When looping this signal to
another device, set Input Termination to Off.
WORD CLOCK INPUT
Provides an isolated high impedance or 75 ohm Word Clock input to synchronize the internal Clock
Generator. It may be routed to XLR Outputs 1 through 4, Outputs 5 through 8 and/or BNC Outputs 1
through 6 via the configuration DIP switches. When present, this signal provides the second priority for
synchronizing the internal Clock Generator when CLOCK SOURCE SET is set to BY PRIORITY.
WORD CLOCK LOOP-THRU
Provides a convenient loop-thru port for the Word Clock input. When looping this signal to another
device, set Input Termination to Off.
CONFIGURATION DIP SWITCHES
Provides routing and other selections for signal flow in the unit. See the DIP Switch Routing Table for
settings:
The switches are labeled left to right BANK A switch "1" is "DIP Switch 1 in the following tables. DIP
Switches 7 through 12 have no function in the MCDA-208/WC106. In this view Outputs 1-4 are
connected to input 1. OUTPUT 5 to 8 are connected to Word Clock generated by the WORD CLOCK
INPUT. The WCLK OUT 1 through 6 are connected the internal clock generator.
8
MCDA‐208/WC106 Manual