Carmanah G Series Instal Manual - Halaman 14

Jelajahi secara online atau unduh pdf Instal Manual untuk Peralatan Pencahayaan Carmanah G Series. Carmanah G Series 18 halaman. Rrfb mast arm kit
Juga untuk Carmanah G Series: Panduan Memulai Cepat (16 halaman), Manual (11 halaman), Manual Penggantian Sistem Manajemen Energi (12 halaman), Manual Penggantian Pintu Kabinet (10 halaman), Manual (9 halaman), Panduan Pengguna (18 halaman), Instal Manual (14 halaman), Manual (10 halaman), Manual (10 halaman)

5. Form a cable strain relief loop and secure cable jacket and red and green conductors to the inner light bar

bracket as shown - using the small cable ties supplied with the light bar.

Position the cable ties on the chamfered edges of the inner light bar bracket to provide clearance

for the light bar cover to slide past the cable during the final assembly steps.

6. Once the cable is secured, cut the single conductors to length.

7. Strip the ends of the single conductors, and usng a small blade screwdriver, depress the spring plunger

on the terminals and insert each conductor into the correct postions as indicated. Ensure that the

conductors are being retained properly by performing a light pull test on each one.

For correct RRFB operation and MUTCD compliance, the black and white conductors must be

landed on the left-hand side light bar, LED module.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

RRFB MAST ARM INSTALL GUIDE

carmanah.com