Carmanah R247-G Manual - Halaman 7

Jelajahi secara online atau unduh pdf Manual untuk Peralatan Pencahayaan Carmanah R247-G. Carmanah R247-G 10 halaman. Wireless control
Juga untuk Carmanah R247-G: Panduan Memulai Cepat (16 halaman), Manual (11 halaman), Manual Penggantian Sistem Manajemen Energi (12 halaman), Manual Penggantian Pintu Kabinet (10 halaman), Manual (9 halaman), Manual (10 halaman), Instal Manual (14 halaman), Manual (10 halaman), Suplemen Panduan Pengguna (12 halaman)

Carmanah R247-G Manual
3.1
G Series – Meanwell AC-DC Power Supply Replacement
Circuit
breaker
1. Access the inside of the power cabinet and switch the circuit breaker to the off position. It is also
recommended to disconnect the AC power source coming into the cabinet if possible.
2. Remove input and output wiring from the existing power supply and set aside to reuse.
3. Remove the two mounting screws and set aside to reuse.
4. Remove existing AC-DC power supply and install the replacement. Note the orientation of the power
supply with the DC output facing up in the cabinet.
5. Reinstall the two mounting screws and secure the power supply.
6. Reinstall the input (AC) and output (DC) wiring harnesses removed from step 2. Ensure the AC wiring is
terminated at the terminals labelled as AC/N (white wire) and AC/L (black wire).
7. Reconnect the AC power source and switch the circuit breaker to the on position in the cabinet. Once the
Energy Management System (EMS) has powered up you can test the system with the input method
installed.
a. Note - 24/7 warning systems will begin flashing immediately.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
AC-DC POWER SUPPLY REPLACEMENT GUIDE
DC output
AC-DC power
supply
AC input
7
|
carmanah.com