Carmanah R820-G Instal Manual - Halaman 10

Jelajahi secara online atau unduh pdf Instal Manual untuk Peralatan Pencahayaan Carmanah R820-G. Carmanah R820-G 14 halaman. Cabinet-based systems
Juga untuk Carmanah R820-G: Panduan Memulai Cepat (16 halaman), Manual (11 halaman), Manual Penggantian Sistem Manajemen Energi (12 halaman), Manual Penggantian Pintu Kabinet (10 halaman), Manual (9 halaman), Manual (10 halaman), Manual (10 halaman), Manual (10 halaman)

11. Insert terminal from door switch harness into Position 2 of AI harness connector. Orient terminal same

way as other terminals present in connector. Tug to confirm it's fully inserted. Cable ties will be tightened

and trimmed at the end of

Connector terminal shown uncrimped. Crimp wings will be bent over wire strands.

4.3

AI 500-070 Field Control Unit (FCU)

1. Install two cable tie mounts. Press into ¼" holes.

2. Install the AI harness wires to the terminals as follows:

a. Yellow → PV+ (over existing terminal)

b. Violet → INPT+

c. Blue → OUT1

d. Red → DC+

e. Black → DC-

3. Secure yellow wire to mounts & location shown with three cable ties. Leave loose/untrimmed for now.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

Section

4.3.

APPLIED INFORMATION (AI) INTEGRATION

INSTALL GUIDE

carmanah.com