Carmanah R829-E Instal Manual - Halaman 15

Jelajahi secara online atau unduh pdf Instal Manual untuk Peralatan Pencahayaan Carmanah R829-E. Carmanah R829-E 20 halaman. Traffic beacon
Juga untuk Carmanah R829-E: Panduan Memulai Cepat (20 halaman), Manual Penggantian Sistem Manajemen Energi (12 halaman)

Halaman Cetak
Carmanah R829-E Instal Manual
• F Series: use the indentation to locate the tip of the drill bit.
• E Series: on the top of the enclosure, mark a point 1.13" from the back and 1.50"
from the side as shown.
15
• Drill a ½" hole on top of the enclosure.
• Deburr hole and remove all aluminum chips.
1.5"
1.13"
Ensure all metal chips are removed
to prevent system damage caused
by short circuits.
Ensure that no burrs are present
that would interfere with the
antenna seal.
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected] | carmanah.com
APPLIED INFORMATION (AI) INTEGRATION KIT INSTALL GUIDE
Drill Hole for Antenna
Ensure equipment is not powered
during installation and wiring of
the system. Recheck all completed
wiring for proper polarity prior to
energizing the system.
E/F Series
Page 15