Carmanah R247-G Manual Penggantian Sistem Manajemen Energi - Halaman 9

Jelajahi secara online atau unduh pdf Manual Penggantian Sistem Manajemen Energi untuk Sistem Keamanan Carmanah R247-G. Carmanah R247-G 12 halaman. Wireless control
Juga untuk Carmanah R247-G: Panduan Memulai Cepat (16 halaman), Manual (11 halaman), Manual Penggantian Pintu Kabinet (10 halaman), Manual (9 halaman), Manual (10 halaman), Instal Manual (14 halaman), Manual (10 halaman), Manual (10 halaman), Suplemen Panduan Pengguna (12 halaman)

4. Review the existing wiring and take an image as needed for future reference. The wiring layout for this

control board is provided in

5. Remove all wiring on the control board by lightly pushing down on wire release button with a small flat

head screwdriver and pull back on the wires. Remove the solar panel wires last and cap off temporarily

with wire nuts or insulation tape. If required, you can cover the solar panel while working on the system

for added protection.

Wire release

buttons

6. Remove the four mounting screws that are securing the EMS to the enclosure and set the EMS aside.

Older systems will have five mounting screws to remove.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |

Section

ENERGY MANAGEMENT SYSTEM

REPLACEMENT GUIDE

carmanah.com