Carmanah R829-G Manual Penggantian Sistem Manajemen Energi - Halaman 5

Jelajahi secara online atau unduh pdf Manual Penggantian Sistem Manajemen Energi untuk Peralatan Konstruksi Carmanah R829-G. Carmanah R829-G 12 halaman. Cabinet-based systems
Juga untuk Carmanah R829-G: Panduan Memulai Cepat (16 halaman), Manual (11 halaman), Manual Penggantian Pintu Kabinet (10 halaman), Manual (9 halaman), Manual (10 halaman), Instal Manual (14 halaman), Manual (10 halaman), Manual (10 halaman)

Halaman Cetak
Carmanah R829-G Manual Penggantian Sistem Manajemen Energi
ENERGY MANAGEMENT SYSTEM
REPLACEMENT GUIDE

2.0 Energy Management System (EMS) Overview

Relay Control/Monitoring:
EXT1 (also labelled as OUT1 on G Series wiring terminal block) – Used for Applied Information time switches
only. Pulses of voltage (relative to DC-) indicate the system is operating with no detected fault. This "heartbeat" is
used as part of Carmanah's StreetHub system monitoring through the Applied Information time switch.
EXT2 (also labelled as OUT2 on G Series wiring terminal block) – This terminal provides a steady +12 V
(nominal, relative to DC-) signal whenever the fixtures are activated and no faults are detected. This digital output
is commonly used for triggering a relay to power third party devices or overhead lighting while a fixture is active. It
is also used for certain push button applications.
5
Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 |
|
carmanah.com