Andea Electronics TPAD20 M Panduan Pengguna - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembaca kode batang Andea Electronics TPAD20 M. Andea Electronics TPAD20 M 14 halaman. Rfid reader machine
Halaman Cetak5.1.1. Configuration Parameter Description
5.1.1.1. System working mode
Guangzhou Andea Electronics Technology Co., Ltd.
http://www.gzandea.com
User's manual
10/18
Guangzhou Andea Electronics Technology Co., Ltd.
http://www.gzandea.com
counting the tag.
5.1.6. Unidentified tag setting
Manufacturer's ID: Set the vendor code used when the tag type cannot be
identified: 1, Tag-it; 2, NXP.
Tag's ID: Set the tag code used when the tag type cannot be identified.
Note: The above configuration is a common configuration. For other
configuration information, consult our technical staff for configuration.
5.2. Equipment testing
5.2.1. Tag inventory testing
After entering the main interface of R-Tool test software, select "ISO Multi-Tag
Test" and carry out the procedure as shown in the following figure ①, ② and ③ for
tag inventory test:
User's manual
15/18