Aleo S19 LK225 Panduan Referensi Cepat - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Panel surya Aleo S19 LK225. Aleo S19 LK225 20 halaman.

Halaman Cetak

1. This Manual in Other Languages

10.6.2 Permissible loads for modules with standard frames

35mm

Load level

Permissible

pressure

Load level I

2400 Pa

Load level III

5400 Pa

10.6.3. Permissible loads for modules with Solrif

Load level

Permissible

pressure

Load level I

2400 Pa

Load level II

3900 Pa

Load level III

5400 Pa

10.6.4 Snow Load

If there is a risk of sliding snow, for load level II and III

depending on mounting type (chapter 10.8), an appropriate

measure has to be taken so that PV module frames on lo-

wer edge of PV modules will not be damaged (e.g. by using

snow hook)

10.7 Key to symbols

Symbol

Explanation

Permissible clamping area (criss-

GID AS034a

crossed, red)

Extra clamp required in this area

GID AS035a

(diagonally-crossed, green)

Extra support required in this area

GID AS036a

(transversal lines, blue)

Clamping point (middle of the clamp

GID AS037a

length)

Linear support

GID AS038a

ΔH

Clearance (height) between the bottom

edge of the module frame and the

mounting surface in millimetres (mm).

Dimensions

All dimensions are shown in mm. Note:

drawings are not always true to scale.

The numerical values are binding.

Page 12/19

Permissible

suction

2400 Pa

frames

Permissible

suction

2400 Pa

aleo solar GmbH | Marius-Eriksen-Straße 1 | 17291 Prenzlau | Germany | [email protected]

Quick Reference Manual Rel. 4.2, 08/2015, en-GB-DE (1)