ATI Technologies HDA600 Panduan Pengoperasian dan Pemeliharaan - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Pemeliharaan untuk Penguat ATI Technologies HDA600. ATI Technologies HDA600 4 halaman.

Halaman Cetak

PERFORMANCE SPECIFICATIONS

OUTPUTS:

DYNAMIC RANGE:

DISTORTION:

RESPONSE:

GAIN:

NOISE:

SEPARATION:

INPUTS:

PHANTOM PWR:

INDICATORS:

POWER:

SIZE:

Six high compliance 6V/80mA stereo drivers capable of over

100mW into six 32 to 600 ohm stereo headphones

110dB Typical at output into 600-ohm headphones

.10% THD max, .01% type, 20-20000 Hz, any level below

clipping

+0/-.5dB, 20-20000 Hz

Program Inputs 26dB.

Cue Input 65db Mic, 35 or 25dB line,

Direct Input 10dB.

Program Input -90dBu E.I.N., 20 – 20000 Hz Cue Mic Input -

110dBu E.I.N.

Direct Inputs –90dBu E.I.N.

70dB minimum at 1kHz

Program: Stereo, 20K balanced, bridging, -10 or +4dBu

nominal Cue: Mono, 2Kohm balanced, diode protected, -50,

and -10, 0dBu nom. Direct: Stereo 10K unbalanced or Mono

20K balanced, 0dBu nominal

+12VDC available for Cue Microphone, selected with P3 and

S2 in MIC position, Resource = 600 ohms

INPUT CLIP - onset of input stage clipping, Yellow LED

CUE CLIP – onset of cue input clipping, Yellow LED

SIGNAL PRESENT– lights 20dB below nominal input level.

Six Green LEDs

POWER – monitors internal DC voltage - Red LED

115/230VAC +/- 10%, 50/60Hz, 24VA, and IEC320 3 pin

connector

1RU package; 19"(48.3cm) W x 1 ¾"(4.5cm) H x

7.5"(19.05cm) D 15lbs (6Kg)

audio.com