ATI Technologies M100 Panduan Pengoperasian dan Pemeliharaan - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Pemeliharaan untuk Penguat ATI Technologies M100. ATI Technologies M100 9 halaman. Ati ultimike m100 microphone amplifier operating and maintenance manual
Juga untuk ATI Technologies M100: Panduan Pengoperasian dan Pemeliharaan (8 halaman)
Halaman Cetak
TECHNICAL SPECIFICATIONS
GAIN
NOMINAL POWER
PEAK LEVELS
MAXIMUM INPUT
NOISE OUTPUT
HUM OUTPUT
DYNAMIC RANGE
HARMONIC DISTORTION
20 to 20,000 Hz
INTERMOD DISTORION
FREQUENCY REPONSE
20 to 20,000 Hz
HIGH PASS FILTER
INPUT HUM REJECTION
INPUT IMPEDANCE
OUPUT IMPEDANCE
OUTPUT RISE TIME
OUTPUT OVERSHOOT
PHASE SHIFT
Audio Technologies Inc. | 154 Cooper Road #902 | West Berlin, NJ 08091 | Voice 856-719-9900 | Fax 856-719-9903 | www.
54 dB nominal, adjustable 0 to 74 dB.
-50 dBm / 150 ohms available input power
+4 dBm / 600 ohms output.
-32 dBu in, +22 dBm out.
0 dBu- HI gain switch, +20 dBu- LO gain
switch
-70 dBm, 20 to 20,000 Hz measurement
bandwidth
-80 dBm, 60, 120, and 80 Hz.
92 dB, peak output to noise.
.10% THD maximum at peak level.
.03% THD maximum at nominal level.
.005% maximum SMPTE 7K / 60 Hz 4:1.
+0, -.25 dB.
-3 dB at 1 Hz and 65 kHz.
-3 dB at 150 Hz nominal, -40 dB at 15 Hz.
90
dB
minimum
adjustment.
40 kohms, balanced.
Transformer balanced, 40 ohms source
impedance, 600 ohms +/- 10% load
impedance
6 uSec symmetric rise and fall times,
typical.
5% maximum.
30 degrees maximum input to output, 20
to 20,000 Hz.
CMR,
internal
audio.com