Formula Sound PM-100 Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengaduk Formula Sound PM-100. Formula Sound PM-100 12 halaman. Modular production

Halaman Cetak
PM-100 Specifications
Frequency response
E.Q. set flat
Maximum output level
Main output and Zone output active balanced.
Distortion
Stereo, auxiliary, mic busses etc. to related O/P's
Noise measured 20Hz-20kHz
Stereo inputs e.q. flat gain set to max
RIAA stage ref. 5mV 1kHz Input shorted
Microphone input (ref 150R)
Gain
Stereo inputs rear trim @ max
Stereo inputs rear trim @ min
Microphone input max
Microphone input min
Maximum input level
Stereo input A (line)
Stereo input A (RIAA)
Stereo input B
Microphone
Input Impedances
Stereo input A
Stereo input B
Microphone input
Equalisation
3 band e.q. per channel
Internal channel jumpers allow the e.q. stage to be disabled if required.
Dimensions
(Exc. Knobs & connectors):
8 Channel
4 Channel
12 Channel
Height 312mm (12.25"-7RU)
Depth 110mm (4.33")
External PSU - PSU5 Width 175mm
Installation Cut-out
Height 312mm
Width:- 4 channel 280mm. 8 channel 433mm. 12 channel 585mm
Balanced outputs For unbalanced operation strap pins 1&3 to ground and use pin 2 hot. This will result in no
loss of output level or performance.
Chassis
The chassis is constructed from custom aluminium extrusions and is available in 4, 8 and 12 input module
configurations. Finish is gun-metal grey anodised aluminium.
Module metalwork is also constructed of custom aluminium extrusions and is silver anodised. The module
colour and notation is by inset reverse printed polyester film, which provides a hard wearing attractive finish.
20Hz - 20kHz +/-0.5dB
+20dBV
< 0.01% typically <0.005%
EIN < -98dB
-80dBV "A" weighted
EIN < -124dBU
+/- 15dB
+ 0dB -20dB
+ 75db
+ 0dB
+20dBV
-8dBV 400mV
+20dBV
+4 dBV
> 47k ohms
> 10k ohms
> 2k ohms active balanced
+5dB -20 dB @
Treble 10kHz
Mid
Bass
Width 483mm ( 19" )
Width 330mm ( 13" )
Width 635mm ( 25" )
Height 75mm
Length 230mm
11
1kHz,
100Hz