Anden A300V1 Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Dehumidifier Anden A300V1. Anden A300V1 12 halaman.

TROUBLESHOOTING

Technical Support is available Monday through Friday, 7:00 a.m. to 5:00 p.m. CST, at (800) 972-3710. Use the guide below to identify and correct

system faults. Contact Technical Support before replacing the unit or any components and for additional troubleshooting.

TABLE 3 – TROUBLESHOOTING GUIDE

Symptom

Dehumidifier does not turn on/run.

Dehumidifier blower is running but

with little or no airflow.

Dehumidifier is not draining properly.

Dehumidifier is producing hot air.

Possible Reason

No power to unit.

Pressure drop across dehumidifier is

higher than 0.6"w.c.

Drain line blocked or unit not level.

Normal function.

Troubleshooting Procedure

• Check the wiring to the dehumidifier.

• If using a Model A76, check that the control is turned ON.

• Check that the circuit breaker has not tripped.

• Check dehumidifier air filter, replace if heavily loaded.

• Check that nothing is obstructing air flow into, or out of the dehumidifier.

• Verify that the unit is level.

• Check that the p-trap is installed correctly and primed.

• Check the drain line for blockages and for a continuous downward slope.

• Air is reheated across the condenser coil, resulting in a temperature rise

between inlet and outlet.