Bosch PMF 250 CES WEU Manual Petunjuk Asli - Halaman 8
Jelajahi secara online atau unduh pdf Manual Petunjuk Asli untuk Alat Listrik Bosch PMF 250 CES WEU. Bosch PMF 250 CES WEU 11 halaman.
Halaman Cetak
OBJ_BUCH-1645-002.book Page 16 Monday, July 23, 2012 8:57 AM
16 | English
Selecting the Application Tool/Accessory
The following table shows examples for application tools. Further application tools can be found in the extensive Bosch acces-
sories program.
Accessory
BIM segment saw
blade
Base plate for sand-
ing, series Delta
93 mm
HCS plunge cut saw
blade, wood
HCS plunge cut saw
blades, wood
BIM plunge cut saw
blades, metal
HM-Riff segment
saw blade
HM-Riff delta plate Mortar, concrete remain-
HM-Riff grout and
mortar remover
Scraper, rigid
BIM serrated seg-
ment saw blade
2 609 006 340 | (23.7.12)
Material
Application
Wooden materials, plas-
Separating and plunge cuts; also for sawing close to edges,
tic, non-ferrous metals
in corners and hard to reach areas;
example: shortening already installed bottom rails or door
hinges, plunge cuts for adjusting floor panels
Depends on sanding sheet Sanding surfaces close to edges, in corners or hard to reach
areas;
depending on the sanding sheet for, e.g., sanding wood,
paint, varnish, stone
Wooden materials, soft
Separating and deep plunge cuts; also for sawing close to
plastics
edges, in corners and hard to reach areas;
example: narrow plunge cut in solid wood for installing a
ventilation grid
Wooden materials, soft
Smaller separating and plunge cuts;
plastics
example: cut-outs in furniture for cable connections
Metal (e. g. unhardened
Smaller separating and plunge cuts;
nails, screws, smaller pro-
example: shortening narrow profiles, cutting fastening
files), non-ferrous metals
elements such as staples
Grouting joints, soft wall
Cutting and separating close to edges, in corners or hard to
tiles, glass-fibre reinforces
reach areas;
plastic and other abrasive
example: removing grouting joints between wall tiles for
materials
repair work, cutting openings in tiles, gypsum boards or
plastic
Rasping and sanding on hard surfaces;
ders, wood, abrasive ma-
example: removing mortar or tile adhesive (e.g. when
terials
replacing damaged tiles)
Mortar, grouting joints,
Removing grouting joints from wall and floor tiles as well as
epoxy resin, glass-fibre re-
removing mortar and joint adhesive (also in right-angled
inforces plastic and other
corners)
abrasive materials
Carpets, coverings
Scraping on hard surfaces;
example: removing carpet and tile adhesive
Insulation material, insula-
Cutting soft materials
tion panels, floor panels,
sound insulation panels,
cardboard, carpet, rub-
ber, leather
Bosch Power Tools