ATI Technologies RADEON 9800 PRO Panduan Memulai - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Perangkat Keras Komputer ATI Technologies RADEON 9800 PRO. ATI Technologies RADEON 9800 PRO 20 halaman.

Halaman Cetak

I have a monitor with five BNC connectors. Why won't it

work with my ATI Graphics Accelerator?

•

For a cable with five BNC connectors, ensure that they are

all connected to the monitor. If only three of the cables are

connected (i.e., R, G, and B), the monitor is expecting a

Sync-on-Green (SOG) signal.

•

Some monitors may have a switch to set the monitor to

either SOG or separate sync. If the switch is set to SOG, the

monitor will show a scrambled display. Setting the switch

to separate/composite sync may resolve the problem.

•

A number of BNC cables, even though they are designed

for Mac OS computers, do not supply the sense code

needed by the graphics card. Using an adapter that sets the

appropriate sense code should solve the problem.

BNC cables do not pass DDC information to the ATI Graphics

Accelerator.

Does the ATI Graphics Accelerator work in all Power

Macintosh computers?

•

No, the ATI Graphics Accelerator only works in PCI or

AGP based Power Macintosh computers with a PCI

(33MHz or 66MHz) or AGP expansion slot. The minimum

system requirements for your specific ATI Graphics

Accelerator are listed in the

the User's Guide.

•

Due to the unique design of the Apple

Graphics Accelerator will not fit into these systems.

"What you'll need"

G4 Cube, ATI

section of