Bosch PSM 18 LI Manual Petunjuk Asli - Halaman 7

Jelajahi secara online atau unduh pdf Manual Petunjuk Asli untuk Alat Listrik Bosch PSM 18 LI. Bosch PSM 18 LI 10 halaman. Cordless multi sander

Halaman Cetak

OBJ_BUCH-1201-002.book Page 13 Monday, June 17, 2013 11:30 AM

Service

 Have your power tool serviced by a qualified repair per-

son using only identical replacement parts. This will en-

sure that the safety of the power tool is maintained.

Safety Warnings for Sander

 Use the machine only for dry sanding. Penetration of wa-

ter into the machine increases the risk of an electric shock.

 Caution, fire hazard! Avoid overheating the object be-

ing sanded as well as the sander. Always empty the

dust collector before taking breaks. In unfavourable

conditions, e. g., when sparks emit from sanding metals,

sanding debris in the dust bag, micro filter or paper sack

(or in the filter sack or filter of the vacuum cleaner) can

self-ignite. Particularly when mixed with remainders of var-

nish, polyurethane or other chemical materials and when

the sanding debris is hot after long periods of working.

 Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

 Keep your workplace clean. Blends of materials are par-

ticularly dangerous. Dust from light alloys can burn or ex-

plode.

 Do not open the battery. Danger of short-circuiting.

Protect the battery against heat, e. g., against

continuous intense sunlight, fire, water, and

moisture. Danger of explosion.

 In case of damage and improper use of the battery, va-

pours may be emitted. Ventilate the area and seek

medical help in case of complaints. The vapours can irri-

tate the respiratory system.

 Use the battery only in conjunction with your Bosch

power tool. This measure alone protects the battery

against dangerous overload.

 Use only original Bosch batteries with the voltage list-

ed on the nameplate of your power tool. When using oth-

er batteries, e.g. imitations, reconditioned batteries or

other brands, there is danger of injury as well as property

damage through exploding batteries.

Product Description and Specifica-

tions

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

Intended Use

The machine is intended for dry sanding and polishing of

wood, filler and coated surfaces. It is especially suitable for

profiles, corners or hard to reach locations.

Product Features

The numbering of the product features refers to the illustra-

tion of the machine on the graphics page.

Bosch Power Tools

1 Battery unlocking button

2 Battery pack *

3 Dust box, complete (Microfilter System)

4 Sanding sheet*

5 Sanding plate

6 SDS button for release of the sanding plate

7 Battery charge-control indicator

8 On/Off switch

9 Handle (insulated gripping surface)

10 Extraction outlet

11 Filter element (Microfilter System)

12 Extraction adapter*

13 Vacuum hose*

14 Pad extender*

15 Narrow pad extender*

16 Sanding sheet for extender*

17 Narrow rounded pad extender*

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

Technical Data

Cordless Multi Sander

Article number

Rated voltage

No-load speed

No-load orbital stroke rate

Sanding sheet surface

Orbit diameter

Weight according to

EPTA-Procedure 01/2003

Noise/Vibration Information

Measured sound values determined according to EN 60745.

Typically the A-weighted sound pressure level of the product

is 72 dB(A). Uncertainty K=3 dB.

The noise level when working can exceed 80 dB(A).

Wear hearing protection!

Vibration total values a

(triax vector sum) and uncertainty K

determined according to EN 60745:

=7 m/s

, K=1.5 m/s

The vibration emission level given in this information sheet has

been measured in accordance with a standardised test given

in EN 60745 and may be used to compare one tool with anoth-

er. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main ap-

plications of the tool. However if the tool is used for different

applications, with different accessories or poorly maintained,

the vibration emission may differ. This may significantly in-

crease the exposure level over the total working period.

An estimation of the level of exposure to vibration should also

take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may sig-

nificantly reduce the exposure level over the total working pe-

riod.

English | 13

PSM 18 LI

3 603 CA1 3..

-1

min

11000

-1

min

22000

104

1.6

1.3

2 609 007 287 | (17.6.13)