Electrolux AOFP201RU Manual - Halaman 5

Jelajahi secara online atau unduh pdf Manual untuk Pembeku Electrolux AOFP201RU. Electrolux AOFP201RU 11 halaman. Bcf 30kg 6 gn1/1 lw (240/3/60hz), bcf 50kg 10 gn1/1 lw (240/3/60hz) / bcf 100kg 20 gn1/1 lw (240/3/60hz) / bcf 70kg 10 gn2/1 lw (240/3/60hz) / bcf 180kg 20 gn2/1 lw (240/3/60hz) / bcf 30kg 6 gn1/1 lw (208/3/60hz) / bcf 50kg 10 gn1/1 lw (208/3/60hz) / bcf
Juga untuk Electrolux AOFP201RU: Panduan Petunjuk Pengoperasian dan Pemeliharaan (27 halaman)

Halaman Cetak

FIG.2

FIG.3

FIG.4

FIG.5

B.1.2.1 Removing the packaging and handling

Cut the straps and remove the protective film, taking care not to

scratch the sheet metal if scissors or blades are used. Remove

the cardboad top, the polystyrene corners and the vertical

protection pieces. For appliances with stainless-steel cabinets,

carefully remove the protective film without tearing it, to avoid

leaving glue stuck to the surface.

Should this happen, remove the traces of glue with a non-

corrosive solvent, rinsing it off and drying carefully. It is advisable

to go over all the stainless steel surfaces with a cloth coated with

vaseline oil, in order to form a protective film. Use a pallet-jack

or fork-lift truck to lift appliances. Inserting the forks under the

pallet, lift the appliance and carry it to the place of installation,

making sure that the load is balanced. Remove the equipment

from the wooden pallet, move it to one side, then slide it onto the

floor.

FIG.6

FIG.7

FIG.8