Electrolux ARCTIS 80220 GS Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembeku Electrolux ARCTIS 80220 GS. Electrolux ARCTIS 80220 GS 20 halaman. Electrolux freezer arctis

Halaman Cetak

1. Frostmatic Function

Slide the door off the pin (G). Unscrew

the pin (G) and install it on the opposite

side.

Unscrew the pivot pin (Z) of the hinge

(E) and the rear screw (Y) with a spanner

of 10 mm and remove the closing device

(M). Take from the accessory bag the

lower closing device left and install it on

the opposite side of the same hinge by

screwing again the rear screw.

Unscrew the upper closing device (N)

from the bottom of the door. Take from

the accessory bag the upper closing de-

vice left and install it on the opposite

side of the bottom of the door by screw-

ing again the screw.

Install the door.

Install the bottom hinge (E) on the opposite side, using the three screws previously

removed inserting the hinge gasket (X).

Remove the blanking cover (F) from the ventilation grille (D) by pushing it in the

direction of the arrow and install it on the opposite side.

Install the ventilation grille (D), clipping it into place.

Unscrew the handle. Remove the plug

with a punch. Install the handle and the

plug on opposite side. Take from the ac-

cessory bag the two plugs and cover the

holes left open after having removed the

handle.

10. Make sure that the front board of the

door is parallel to the front board of the

top.

11. Reposition, level the appliance, wait for

at least four hours and then connect it

to the power socket.

Do a final check to make sure that:

• All screws are tightened.

• The magnetic seal adheres to the cabinet.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the

cabinet. In that case, wait for the natural fitting of the gasket.

Environmental concerns

The symbol

treated as household waste. Instead it should be taken to the appropriate collection point

for the recycling of electrical and electronic equipment. By ensuring this product is disposed

on the product or on its packaging indicates that this product may not be

Environmental concerns