Bosch Uneo Maxx Manual Petunjuk Asli - Halaman 5

Jelajahi secara online atau unduh pdf Manual Petunjuk Asli untuk Alat Listrik Bosch Uneo Maxx. Bosch Uneo Maxx 11 halaman. Cordless rotary hammer
Juga untuk Bosch Uneo Maxx: Manual Petunjuk Asli (18 halaman)

Halaman Cetak

OBJ_BUCH-1250-002.book Page 5 Wednesday, March 9, 2011 8:56 AM

pack may create a risk of fire when used with another bat-

tery pack.

Use power tools only with specifically designated bat-

tery packs. Use of any other battery packs may create a

risk of injury and fire.

When battery pack is not in use, keep it away from oth-

er metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a

connection from one terminal to another. Shorting the

battery terminals together may cause burns or a fire.

Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally oc-

curs, flush with water. If liquid contacts eyes, addition-

ally seek medical help. Liquid ejected from the battery

may cause irritation or burns.

Service

Have your power tool serviced by a qualified repair per-

son using only identical replacement parts. This will en-

sure that the safety of the power tool is maintained.

Hammer Safety Warnings

Wear ear protectors. Exposure to noise can cause hear-

ing loss.

Hold power tool by insulated gripping surfaces, when

performing an operation where the cutting accessory

or fastener may contact hidden wiring. Cutting accesso-

ry and fasteners contacting a "live" wire may make ex-

posed metal parts of the power tool "live" and could give

the operator an electric shock.

Use appropriate detectors to determine if utility lines

are hidden in the work area or call the local utility com-

pany for assistance. Contact with electric lines can lead

to fire and electric shock. Damaging a gas line can lead to

explosion. Penetrating a water line causes property dam-

age or may cause an electric shock.

Switch off the power tool immediately when the tool in-

sert jams. Be prepared for high reaction torque that

can cause kickback. The tool insert jams when:

— the power tool is subject to overload or

— it becomes wedged in the workpiece.

Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

Always wait until the machine has come to a complete

stop before placing it down. The tool insert can jam and

lead to loss of control over the power tool.

Do not open the battery. Danger of short-circuiting.

Protect the battery against heat, e. g., against

continuous intense sunlight, fire, water, and

moisture. Danger of explosion.

In case of damage and improper use of the battery, va-

pours may be emitted. Provide for fresh air and seek

medical help in case of complaints. The vapours can irri-

tate the respiratory system.

Use the battery only in conjunction with your Bosch

power tool. This measure alone protects the battery

against dangerous overload.

Bosch Power Tools

Use only original Bosch batteries with the voltage list-

ed on the nameplate of your power tool. When using oth-

er batteries, e. g. imitations, reconditioned batteries or

other brands, there is danger of injury as well as property

damage through exploding batteries.

Product Description and Specifica-

tions

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

Intended Use

The machine is intended for hammer drilling in concrete,

brick and stone. It is also suitable for drilling without impact in

wood, metal, ceramic and plastic. Machines with electronic

control and right/left rotation are also suitable for screwdriv-

ing.

Product Features

The numbering of the product features refers to the illustra-

tion of the machine on the graphics page.

1 SDS-Quick tool holder

2 Dust protection cap

3 Locking sleeve

4 Selector switch for drilling/hammer drilling

5 Indicator for right rotation

6 Indicator for left rotation

7 Rotational direction switch

8 On/Off switch

9 Battery charge-control indicator

10 Battery*

11 "PowerLight"

12 Universal bit holder*

13 Screwdriver bit*

14 Screwdriver bit with ball catch*

15 Drill bit with hexagon shank*

16 Drill bit with SDS-Quick tool holder*

17 Handle (insulated gripping surface)

18 Battery unlocking button

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

Technical Data

Cordless Rotary Hammer

Article number

Rated voltage

Rated speed

Impact rate

Please observe the article number on the type plate of your machine.

The trade names of the individual machines may vary.

English | 5

Uneo Maxx

3 603 J52 3..

-1

min

0–900

-1

min

0–5000

2 609 004 639 | (9.3.11)