CarNavi-Tech Mercedes09 Panduan Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Navigasi Mobil CarNavi-Tech Mercedes09. CarNavi-Tech Mercedes09 4 halaman.
Halaman Cetak50P ribbon should go out from the "Downside" of
the monitor, otherwise it will conflict with the
CD‐ejecting slot.
The other side of the ribbon should be inserted
into the interface box.
(4)DIP SETTING:
DIP
1
2,3
4
5
6
7
8
3 / 4
Finally, the total box should be
wrapped firmly onto the monitor or
chassis or other part inside the car
dash board.
[Be sure the fan is not blocked by glue
type when fixing onto monitor]
ON-Down
RGB enabled
AV1/2 enabled
RGB 800*480
When reverse[ Green wire
=12V]：go to AV4
Must UP for work
Must UP for work
The aluminum has a hook
which may conflict with
the 50P cable, cut that
hook off.
OFF---Up
RGB disable
AV1/2 disable
RGB 480*234
When reverse[ Green wire
=12V]：go to Original video