Bosch 300 Series Panduan Servis - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Servis untuk Pengering Bosch 300 Series. Bosch 300 Series 36 halaman. Built-in wall ovens
Juga untuk Bosch 300 Series: Petunjuk Penggunaan Manual (40 halaman), Panduan Pengguna (21 halaman), Panduan Instalasi (6 halaman), Panduan Instalasi (36 halaman), Panduan Instalasi (32 halaman), Panduan Penggunaan dan Perawatan / Petunjuk Pemasangan (40 halaman), Panduan Petunjuk Pengoperasian (50 halaman), Panduan Memulai Cepat dan Keselamatan (7 halaman), Panduan Instalasi (28 halaman), Panduan Memulai Cepat (7 halaman), Panduan Penggunaan dan Perawatan (32 halaman), Panduan Memulai Cepat dan Keselamatan (7 halaman), Panduan Memulai Cepat dan Keselamatan (13 halaman)

Halaman Cetak
Bosch 300 Series Panduan Servis
PLUG
PIN NO
NO
X110
1-BU
2-Not Used
3-BU
LOWER CAVITY ELEMENTS
X201
1-BU **
2-Blank
3-Blank
4-BK **
5-BK
6-Blank
7-OR
X202
1-RD
2-RD
3-Not Used
4-Not Used
5-YE
X203
1-OR
2-Not Used
3-RD
4-Blank
5-RD **
6-Blank
7-BU **
X204
1-YE
2-Not Used
3-Blank
4-BK
5-BK
X210
1-BU
2-Not Used
FROM/TO
High Temperature Cutout (HTC)
N/A
High Temperature Cutout (HTC)
K204 Relay to Ring Element
N/A
N/A
L1 to K204 Relay
L1 to K202 Relay
N/A
K202 Relay to Bake Element
L2
L2 to K006 DLB Relay
N/A
N/A
K006 DLB Relay to Broil Element
K004 DLB Relay to Bake Element
N/A
L2 to K004 DLB Relay
N/A
L2 to K005 DLB Relay
N/A
K005 DLB Relay to Ring Element
K206 to Broil Element
N/A
N/A
L1 to K206 Relay
L1 to K206 Relay
High Temperature Cutout (HTC)
N/A
PLUG
PIN NO
NO
3-BU
LOWER CAVITY SMALL LOAD
X205
1-YE
2-RD
3-BN
4-Not Used
5-Not Used
6-BN
X206
1-YE
2-YE
3-YE/BK
4-OR/BK
5-Not Used
6-VT/WH
7-BN/WH
X207
1-WH
2-Not Used
3-WH
4-RD
5-BK
6-WH
X209
1-BU/WH
2-BU
* Not used on HBL3, HBN3
Table 6 Plugs and pins on the PC control module
To remove the PC control module...
1. Disconnect all wires.
2. Remove 1 T20 screw securing control module to chassis.
3. Slide module to the left to release the 3 tabs on the bottom of
Service Manual for Bosch Built-in Wall Ovens
FROM/TO
High Temperature Cutout (HTC)
K212 Relay to Convection Fan
L2 to K217 Relay
K216 to Light Transformer
N/A
N/A
K217 Relay to Motorized Door Latch (MDL)
Door Switch
Latch Switch
Latch Switch
Latch Switch
N/A
Door Switch
Door Switch
Hall Effect Sensor
N/A
Temperature Sensor
Hall Effect Sensor
Hall Effect Sensor
Temperature Sensor
X105-P3 to Cooling Fan (L)
X105-P4 to Cooling Fan (H)
** HBL8, HBL5, HBN5 only
Page 17 of 36