ATIGO A3101 Panduan Instalasi - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem interkom ATIGO A3101. ATIGO A3101 11 halaman. 2-wire video system
Juga untuk ATIGO A3101: Panduan Instalasi (15 halaman), Panduan Instalasi (7 halaman)
Electric lock mode setting
When the Camera Module is in standby.
1. Press Key A, the Unlock Indicator will turn
on with the warning sound of a long Beep
followed by a short Beep.
2. Press Key A again to select mode
Mode = 0 (default)
Normally Open: The Status indicator blinks
once with the warning sound of a single long
Beep
Mode = 1
Normally Closed: The Status indicator
blinks twice with the warning sound of a long
Beep followed by a short Beep.
Lock time delay setting
When the Camera Module is in standby
1. Press Key A, the Unlock indicator turns
on with the warning sound of a long Beep
followed by a short Beep.
2. Press Key B and hold on to enter the
Unlocking Time Delay Setting, a warning
sound of a short single Beep will be heard.
The Status indicator will blink once per
second.
The Unlocking Time delay is indicated by the
number of times that the Status indicator
blinks (set in seconds). For example: The
Status indicator blinks four times, that
means the unlocking time is 4 seconds.
Sound setting
When the Camera Module is in standby.
1. Press and hold Key A for 3 seconds to
enter the Sound Option Mode, the Status
indicator will turn on and the current
sound will play.
2. Press Key A again to play the next tune
3. Press Key B to exit.
Sound volume setting
When the Camera Module is in standby.
1. Press Key B to enter Tune Volume
Setting, the Talk indicator will turn on and
play the sound at the current volume.
2. Press Key A to increase/decrease the
volume (loop setting)
3. Press Key B to exit.
Talk volume setting
1. During the conversation, press and hold
Key B for 3 seconds to enter the Talk
Volume Setting.
The Talk indicator will turn on with the
warning sound of a long Beep followed by a
short Beep.
2. Press Key A to increase/decrease the
volume (loop setting).
3. Press Key B to exit.