Andersen Windows & Doors Andersen 1000 Panduan Instalasi
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Dengan kunci Andersen Windows & Doors Andersen 1000. Andersen Windows & Doors Andersen 1000 15 halaman. Handle set and closer
Halaman CetakInstallation Guide
For Andersen ® 1000 Handle Set and Closer
READ ENTIRE GUIDE BEFORE BEGINNING INSTALLATION. Please handle your components with care to avoid damage and/or scratches.
pLEASE NOTE: Proper assembly, installation and maintenance are essential if the benefits of your Andersen
please read and follow this guide completely. If your abilities do not match this procedure's requirements, contact an experienced contractor.
You may direct any questions to the Solution Center at 1-800-933-3626, Monday through Friday, 7 a.m. to 7 p.m. Central Time, and Saturday
and Sunday, 8 a.m. to 5 p.m. Central Time.
FASTENER IDENTIFICATION
#8 X 1/2"
PHiLLiPS FLaT HEaD SCrEw
QTY: 2
#10 X 2"
PHiLLiPS Pan HEaD SCrEw
QTY: 4
RECOMMENDED TOOLS
Improper use of hand or power tools could result in injury and/or product damage. Follow equipment manufacturer's instruc-
tions for safe operation. Always wear safety glasses.
• Safety Glasses
• Phillips Head Screwdriver
• Hammer
EMCO Enterprises, Inc. is a wholly owned subsidiary of Andersen Corporation. EMCO manufactures Andersen® and EMCO®
doors. EMCO supports the limited warranties covering Andersen® storm and screen doors. "Andersen", "EMCO" and all other
marks where denoted are trademarks of Andersen Corporation. ©2007 Andersen Corporation. All rights reserved.
I Mp O RTAN T
#6 X 0.8"
PHiLLiPS Pan HEaD SCrEw
QTY: 2
#12 X 5/8"
PHiLLiPS Pan HEaD SCrEw
QTY: 2
w a r n i n g
• Pencil
• 3/32" & 5/32" Drill Bits
• Drill
product are to be fully attained. Therefore,
®
#10 X 1-1/2"
PHiLLiPS FLaT HEaD SCrEw
QTY: 1
SHOrT Pin
QTY: 1
• Chisel
• Center Punch
#6 X 1/2"
PHiLLiPS FLaT HEaD SCrEw
SELF-TaPPing
QTY: 4
LOng Pin
QTY: 1
EMCO Enterprises, Inc.
PO Box 853
Des Moines, IA 50306-0853
Revised 04-2007 7057
Part Number 616316