Andersen Windows & Doors FSB 1035 Petunjuk Manual - Halaman 7

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Dengan kunci Andersen Windows & Doors FSB 1035. Andersen Windows & Doors FSB 1035 7 halaman. Trim set hardware application fsb 1035 hardware style shown in guide. procedure is similar for all styles. for active and passive hardware

7
A-Series Frenchwood® Hinged Inswing and 400 Series Frenchwood Hinged Inswing Patio Doors Only
Latch
Receiver
Screws
Remove existing latch receiver screws from latch receiver and dispose of properly. Position latch strike plate over latch receiver and fasten with
color matched latch receiver screws (provided).
▶ Procedure is complete.
▶ For passive hardware application for AP/PA doors: follow steps 3 - 7.

Care and Maintenance

General Information
Your Andersen
hardware has been manufactured of high quality, fine
®
metal. Fine metal requires periodic attention to maintain its beauty and
characteristics. Climate, location, and exposure to corrosive environments
such as industrial areas, pesticides, herbicides, or salts are challenges to
your ability to maintain the hardware's beauty and characteristics.
Wash hardware using a mild detergent and a soft cloth to remove mild stains, loose dirt, and soil. Avoid abrasive cleaners, cloths,
or brushes. When mild detergent and a soft cloth are not adequate, a diluted, household vinegar solution (5%) and a soft bristled,
non-abrasive brush may be used. Avoid contact with painted components and nearby surfaces. After cleaning, wipe down with a
damp cloth and wipe dry to prevent spots.
9 173980
Frenchwood
Patio Door latch strike plates differ for active doors versus active-passive/
®
passive-active two panel doors. Follow procedure for your type of door.
Active Unit
(Jamb)
Latch
Receiver
Latch
Strike
Plate
Color Matched
Latch Receiver
Screws (provided)
NOTICE
Latch
Receiver
Screws
Satin Stainless Steel
7
AP/PA Unit
(Passive Panel)
Latch
Receiver
Latch
Strike
Plate
Color Matched
Latch Receiver
Screws (provided)
CAUTION
Do not use or apply harsh chemicals, abrasives
and/or cleaners. Product damage could occur.
Do not refurbish hardware. Contact a professional
hardware restorer for refurbishing.