Bosch PHG 500-2 Manual Petunjuk Asli - Halaman 6
Jelajahi secara online atau unduh pdf Manual Petunjuk Asli untuk Pengering Bosch PHG 500-2. Bosch PHG 500-2 12 halaman. Hot air gun
Juga untuk Bosch PHG 500-2: Manual Petunjuk Asli (12 halaman)
OBJ_BUCH-1348-001.book Page 13 Tuesday, January 25, 2011 1:51 PM
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Product Description and
Specifications
Intended Use
The power tool is intended for the forming and
welding of plastic, removal of paint and the
warming of heat-shrinkable tubing. It is also
suitable for soldering and tinning, loosening of
adhesive joints and the defrosting of water
lines.
Bosch Power Tools
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Nozzle
2 Heat protection collar
3 Standing surface
4 On-/Off switch with air-volume regulator
and temperature control
(PHG 500-2/PHG 600-3)
5 On/Off switch with air-volume regulator
(PHG 630 DCE)
6 Button for temperature control
(PHG 630 DCE)
7 Display (PHG 630 DCE)
8 Wide jet nozzle*
9 Glass protection nozzle*
10 Reflector nozzle*
11 Welding rod*
12 Welding shoe*
13 Reduction nozzle*
14 Heat-shrinkable sleeve*
15 Angle nozzle*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Noise Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted sound pressure level of
the product is lower than 70 dB(A).
1 609 929 X70 | (25.1.11)
English | 13