Anderson FFA10 Panduan Pengoperasian - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pembakar Anderson FFA10. Anderson FFA10 13 halaman.

4. Description

FFA – FlexFire® Air burner is trademark of Anderson Thermal Solutions (Suzhou) Co., Ltd.,

it is designed for regenerative glass furnace, with adjustable mechanism for flame length

and energy release position.

4.1

Standard configuration

As shown in Fig 1, standard burner sets including:

a. FlexFire® burner

b. Burner bracket and base plate

c. Seal plate (or water-cooling socket)

Figure 1. Flex Fire® burner standard configuration set

4.2

Inspection before burner bracket installation

Before installing the bracket, check the position of all the scales are in the middle

position. Otherwise, loosen the fixing bolts and reset the scale to middle of the ruler.

As shown in Figure 2, adjust the bracket so that the four fixing bolts are in the middle

of the chute, and ensure that the bracket can move in all directions, front, back, left,

and right.

There are two mounting brackets, one for side port firing, the other for underpart

firing. (shown as Fig 2a and 2b)

Anderson Thermal Soluions（Suzhou）Co., Ltd

Anderson Thermal Solutions –FFA10 Burner Operation Manual

Burner

Base plate

Seal plate

Burner bracket