Anderson M-115 Panduan Pemilik - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Kendaraan Utilitas Anderson M-115. Anderson M-115 18 halaman. Log loader on a r-flex 410 trailer
Halaman Cetak
2.1 Model M-115 Basic Components :
This loader could be connected to a small or compact tractor and it can be operated using the tractor's
hydraulic system. If your tractor is equipped to handle this loader we can supply the necessary part you will need
to make this connection. Please note that the recommended oil flow must be between 5 to 8 GPM (22.5 to 36
liters/minute). Keeping all fittings and connections clean whenver you are servicing them is strongly recommend,
for this will help you avoid many problems. Check to make sure that all hoses are well placed so that they will
not twist, kink, or wear during operation.
Our Loader is composed primarily with a mast, a lifting extending boom, and a grapple. These units are
all installed on an Anderson R-Flex 410 tandem trailer. This trailer has a width of 64 inches (1.65m) and a
structutural extendable length of 11 feet 6 inches (3.50m). This trailer can handle wooden logs up to 12 feet in
length (3.66m). There are retaining posts on each side to hold the load, and a solid metal guard that protects
the mast and the operator in front.
PRIMARY BOOM
MAST
CONTROL VALVE
DRAW BAR
This loader connects to a tractor with a pivoting draw bar. The control valve is situated above the draw bar and
it has 5 basic lever controls. More detailed operating instructions are available on the next page (point 2.2). One
or two extra lever controls can be added to the front of this control valve assembly based upon the optional
equipment added (point 2.4, page 10-11).
Installed behind the control valve is the vertical rotating mast which is connected to a horizontal lifting
arm composed of two parts. The 1
nd
The 2
part includes the rotating grapple and the rotor which are connected to the secondary boom (stick). The
maximum reach of the boom is 9 feet 6 inches. (2.9m). Stabilizing legs with cylinders are installed on each side
of the mast to ensure that the loader is well balanced and stable during machine operation. A grid is installed on
the front part of the trailer to support the load and at the same time protect the operator.
The Tandem Axle is bolted to the central beam of the trailer.
2 M-115 Loader General Characteristics
STABILIZERS
st
part is the primary boom which is connected to the secondary boom (stick).
GRID
SECONDARY BOOM
ROTOR
GRAPPLE
TANDEM AXLE
8