Carnival King 382PM30R Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Dapur Carnival King 382PM30R. Carnival King 382PM30R 8 halaman. Popcorn popper with warming / holding merchandiser royalty series
Juga untuk Carnival King 382PM30R: Panduan Pengguna (5 halaman)

Halaman Cetak
Carnival King 382PM30R Panduan Pengguna
Popcorn Poppers
User Manual
Cleaning & Maintenance
•
ALWAYS unplug and allow unit to cool completely before cleaning.
•
DO NOT use any acidic, citrus-based, or abrasive cleaners on the acrylic doors as they might cause scratching or dullness.
•
DO NOT immerse the kettle into water or place in dishwasher.
Daily Cleaning
1.
Frequently empty the catch tray of unpopped popcorn kernels and clean with soap and water. Dry thoroughly.
2.
With a clean damp cloth, wipe the doors, glass, and metal surfaces.
3.
Use a wet cloth to clean the kettle surface inside and out.
4.
Allow to dry thoroughly before plugging unit back in and operating.
Kettle Cleaning
•
Frequent cleaning of the popcorn kettle is strongly recommended. This will prevent burning of excess oils on the bottom
of the kettle.
1.
Add 1½-2 cups of hot water into the kettle (no detergent is necessary).
2.
Place a towel in the bottom of the main unit and place a large bowl or container on the towel (the container must be large
enough to easily pour water from the popcorn kettle).
3.
Plug the unit in and turn ON the Stirrer & Kettle Heater switches.
4.
Bring the water to a boil for 1-2 minutes.
5.
Turn OFF the Stirrer and Kettle Heater switches and carefully pour the water from the popcorn kettle to the
bowl or container.
CAUTION: Kettle and water will be HOT!
6.
Repeat procedure 2-3 times for best results.
Compatible Cleaning Products
•
Noble Chemical Formula D Decarbonizer & Degreaser (#147FORMULAD)
•
Carnival King Kettle Kleen Popcorn Kettle Cleaner (#382KETTLEKLN)
•
Noble Chemical Reflect Glass Cleaner (#147REFLECT)
Kettle Removal
If you need to remove the kettle for cleaning:
1.
Make sure unit is NOT connected to a power supply. UNPLUG power cord.
2.
Allow unit to cool completely.
3.
To remove: reverse steps 1-5 (on page 4)
|
CarnivalKingSupplies.com
7