Bosch WPG23108IN Panduan Pengguna dan Petunjuk Instalasi - Halaman 34
Jelajahi secara online atau unduh pdf Panduan Pengguna dan Petunjuk Instalasi untuk Pengering Bosch WPG23108IN. Bosch WPG23108IN 48 halaman.
Halaman Cetak
en Cleaning and servicing
15.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press
Iron Dry and, at the
2.
same time, turn the programme
selector to position 2.
a The display shows the current
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 33
To change the value, press
4.
Ready In .
To save the changes, switch off
5.
the appliance.
16 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
Note: You can find further information
in the digital instruction manual by
scanning the QR code in the table of
contents or on www.bosch-
home.com.
34
16.1 Tips on cleaning and
Wipe down the
housing and the
controls with
nothing but water
and a damp
cloth.
Remove all de-
tergent residue,
spray residue or
other residues
immediately.
Leave the appli-
ance door open
after use.
16.2 Base unit
The base unit is the accessible area
at the bottom of the appliance in
which you will find the heat ex-
changer.
Opening the base unit
Requirements
¡ The appliance has cooled down
for 30 minutes.
¡ The appliance door is closed.
care
This ensures the
parts of the appli-
ance will remain
clean and hy-
gienic.
Fresh deposits
are easier to re-
move without
leaving any
residue.
This allows the
residual water to
dry, reducing
odours in the ap-
pliance.