Bosch WTA74201AU Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Pengering Bosch WTA74201AU. Bosch WTA74201AU 40 halaman.
Halaman Cetak
7
Environmental
protection
P ackaging/old appliance
E n v i r o n m e n t a l p r o t e c t i o n
)
Dispose of packaging in an
environmentally-responsible manner.
This appliance is designated according
to European directive 2012/19/EC
which governs waste electrical and
electronic equipment (WEEE).
The directive provides a framework for
the collection and recycling of old
appliances, which is valid across the
EU.
Energy-saving tips
Spin the laundry before drying. The
■
drier the laundry, the shorter the
drying time will be, thus consuming
less energy.
Load the dryer with the maximum
■
load.
Do not exceed the maximum
Note:
load for the programs, as this
prolongs the drying time and
increases energy consumption.
Ventilate the room and keep the air
■
inlet on the dryer free to ensure air
exchange.
Clean the fluff filter after each drying
■
cycle. If the fluff filter is dirty, the
drying time is prolonged and energy
consumption is increased.
Energy-saving mode: If the dryer is
■
not operated for a prolonged period,
it automatically switches off before
the program starts and when the
program has ended to save energy.
The display panel and indicator
lamps go off after a few minutes and
the Start button flashes. To activate
the lighting, press any button, open
or close the dryer door or turn the
program selector.
Environmental protection
5
Installation and
connection
S cope of delivery
I n s t a l l a t i o n a n d c o n n e c t i o n
Dryer
■
Installation and operating
■
instructions
Basket for woollens
■
Installing and connecting the
dryer
:
Warning
Risk of death!
There is a risk of electric shock as the
dryer is operated with electricity.
Check the dryer for visible damage.
■
You must not operate the dryer if it is
damaged.
Before connecting the dryer to the
■
power supply, ensure that the
electric voltage specified on the
rating plate matches the voltage of
your socket.
Only use earth-leakage circuit
■
breakers with the following symbol:
z.
Ensure that the mains cable is not
■
kinked or trapped, and that it does
not come into contact with heat
sources or sharp edges.
*
Depending on the model
en
*
13