Carnival King 382CD225 Panduan Pengguna - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Dispenser Carnival King 382CD225. Carnival King 382CD225 9 halaman. Nacho cheese dispenser
Halaman Cetak
www.CarnivalKingSupplies.com
WWW.CARNIVALKINGSUPPLIES.COM • [email protected]
WWW.CARNIVALKINGSUPPLIES.COM • [email protected]
nacho cheese dispenser
NACHO CHEESE DISPENSER
NACHO CHEESE DISPENSER
4. Place the product on the rack
4. Place the product on the rack
4. Place the product on the rack
with the spout and tube directed
with the spout and tube directed
with the spout and tube directed
toward the front, and downward
toward the front, and downward
toward the front, and downward
through the opening.
through the opening.
through the opening.
PRODUCT REMOVAL
PRODUCT REMOVAL
PRODUCT REMOVAL
1. Open the front door of the warmer.
1. Open the front door of the warmer.
1. Open the front door of the warmer.
2. Open Tube Clamp (see Step 3).
2. Open Tube Clamp (see Step 3).
2. Open Tube Clamp (see Step 3).
3. Remove tubing by pulling from the bottom up.
3. Remove tubing by pulling from the bottom up.
3. Remove tubing by pulling from the bottom up.
4. Remove empty product bag and tube from the cheese dispenser.
4. Remove empty product bag and tube from the cheese dispenser.
4. Remove empty product bag and tube from the cheese dispenser.
Initial Setup For Portion Control
Initial Setup For Portion Control
Initial Setup For Portion Control
DISPENSING VOLUME
DISPENSING VOLUME
DISPENSING VOLUME
The dispenser/warmer is set at the factory with pre-set dispensing volume levels (manual, small).
The dispenser/warmer is set at the factory with pre-set dispensing volume levels (manual, small).
The dispenser/warmer is set at the factory with pre-set dispensing volume levels (manual, small).
• The Yellow Switch is set to free-flow (manual), as long as the button is activated, the warmer will dispense
• The Yellow Switch is set to free-flow (manual), as long as the button is activated, the warmer will dispense
product.
product.
• The Yellow Switch is set to free-flow (manual), as long as the button is activated, the warmer will dispense
product.
• The TIME switch banks on the LCD board for the Orange Button are pre-set with factory times to
• The TIME switch banks on the LCD board for the Orange Button are pre-set with factory times to
dispense product.
dispense product.
• The TIME switch banks on the LCD board for the Orange Button are pre-set with factory times to dispense
• See LCD Board Settings section (next page) to change the dispensing settings.
product.
• See LCD Board Settings section (next page) to change the dispensing settings.
• See LCD Board Settings section (next page) to change the dispensing settings.
DISPENSING TEMPERATURE
DISPENSING TEMPERATURE
The dispenser/warmer is factory set to a default temperature unit for warming the product.
The dispenser/warmer is factory set to a default temperature unit for warming the product.
DISPENSING TEMPERATURE
• To adjust the temperature setting to fit your application, the LCD board has an adjustable temperature setting C/F
• To adjust the temperature setting to fit your application, the LCD board has an adjustable temperature setting C/F
The dispenser/warmer is factory set to a default temperature level for warming the product.
in the left of the LCD board.
in the left of the LCD board.
• To adjust the temperature setting to fit your application, the LCD board has an adjustable temperature setting
C/F in the left of the LCD board.
a
a
6
.
| | | | | [email protected]
5. Guide the tube through the pump
5. Guide the tube through the pump
5. Guide the tube through the pump
slot from top to bottom.
slot from top to bottom.
slot from top to bottom.
6. Close the tube clamp by turning the
6. Close the tube clamp by turning the
6. Close the tube clamp by turning the
cam clockwise, and close the warmer
cam clockwise, and close the warmer
cam clockwise, and close the warmer
front door.
front door.
front door.
rr�
rr�
�
�
·
·
;
;
!ii
!ii
.
.
(
(
(
(
=
=
'·
'·
'
'