Carnival King 382SMM3 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Dispenser Carnival King 382SMM3. Carnival King 382SMM3 15 halaman.

Halaman Cetak
Frozen Beverage Dispenser
User Manual

Troubleshooting

CAUTION
PROBLEM
The Main Switch is not set to I
THE MACHINE
The machine is not plugged in
DOES NOT
TURN ON
Electric cable defective
The Main Switch is defective
The Spiral Blade Switch is set to 0
The Beverage Type Control Switch is not set to I
Product has too high of a sugar content
THE MACHINE
Wrong Thickness Control setting
DOES NOT MAKE
THE PRODUCT
Insufficient ventilation or nearby heat source
INTO SLUSH
Leaking refrigerant
Dust accumulation on condenser
The micro-switch of the Thickness Control is defective
Spiral Blade Switch set to 0
THE SPIRAL
BLADE DOES
Ice accumulation in bowl
NOT TURN
Spiral Blade Switch is defective
THE SPIRAL
BLADE MAKES
Insufficient lubrication
NOISE
Dispensing Tap Valve (C) is defective
DISPENSING TAP
IS LEAKING
Insufficient lubrication
DISPENSING
TAP DOES NOT
Ice accumulation in bowl
DISPENSE
PRODUCT
Problems marked with this symbol must be handled by a specialized technician.
CAUSE
|
CarnivalKingSupplies.com
SOLUTION
Set the Main Switch to I
Plug the machine into the outlet
Replace the electric cable
Replace the switch
Set the Spiral Blade Switch to I
Set the Beverage Type Control Switch to I
Remove product and dilute in a separate container
Set Thickness Control correctly (see Fig. 3)
Move the machine so it has adequate ventilation and is far
away from heat sources (see Fig. 1)
Restore and recharge the cooling system
Clean the condenser (see Fig. 14/15)
Clean or replace the micro-switch
Set Spiral Blade Switch to I
Switch the Main Switch OFF and wait for ice to melt
Replace the Spiral Blade Switch
Lubricate all areas correctly (see Fig. 16-18)
Replace the Tap Valve (C)
Lubricate Tap Valve (C) correctly (see Fig. 22)
Switch the Main Switch OFF and wait for ice to melt
10