Community HSB3-BFR22 Petunjuk Manual - Halaman 5

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Penguat Community HSB3-BFR22. Community HSB3-BFR22 12 halaman. Balancepoint flyware for point source and subwoofer loudspeakers models ip8, ip6, is8, and is6, dual vertical splay with extension kit for 2-way models

Halaman Cetak
VERTICAL ARRAYS
VSB-SBR54
(continued)
7
9
Figure 9. Lift the subwoofer into place under the
rails and attach to the rails
Fully tighten the connections
I SERIES
HF1-3
Figure 7. Lift the lower full-range cabinet into place
and attach the cabinet brackets
Fully tighten those connections
HN8
HW8
BalancePoint™ Flyware
8
Figure 8. Adjust hinge to desired angle and
reinsert the 6mm hardware
Snug tighten the 6mm connections until
desired angle is confirmed, then fully tighten
10
Figure 10. Fully tighten all
connections
An additional subwoofer can be added
under the subwoofer by using a tight
pack kit (TPK). Attach the mounting
plates to the lower subwoofer and lift
into position then connect the two. They
must be placed horizontally (landscape
position). Do not exceed the Safe Working
Load of 500 lbs with the full assembly.
PH
HH6
HW6
HN6
Page 5