ANDERSON-NEGELE AV-9900 Panduan Konfigurasi Dasar - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Konfigurasi Dasar untuk Perekam Suara ANDERSON-NEGELE AV-9900. ANDERSON-NEGELE AV-9900 5 halaman. Htst recorder controller

Halaman Cetak
AV-9900 HTST Recorder Controller
1.
Press CHART key twice to Chart Configuration
2.
Press down to Chart Tag
3.
Press MOD
4.
Use up/down arrows to adjust each individual character as needed
5.
Press ENTER to save
6.
Press RESET back to main screen
Changing Chart Speed (Rotation Time)
1.
Press CHART key twice to Chart Configuration
2.
Press down
3.
Scroll to Chart Speed
4.
Press MOD
5.
Select 12 or 24hr (scroll for more options)
a.
12 hour required for PMO
6.
Press ENTER to save
7.
Press RESET back to main screen
****Be Advised STLR is ALWAYS set to inputs 1&2 and CANNOT be changed****
1.
2.
Scroll to Function Set Up
3.
Press down
4.
Select the input you are trying to assign (make sure it is flashing and press enter or press
the soft key under the input)
5.
Scroll to INPUT NUMBER
a.
Verify the input matches per your model number
b.
Press MOD to get a cursor
c.
Use up/down arrows to change
d.
Press ENTER to save
6.
Repeat for each input function your recorder has
7.
Press RESET back to the main screen when finished
8.
Scroll to Configuration
9.
Press Down
10. Scroll to Inputs
11. Press down
12. Select the input you are trying to assign (make sure it is flashing and press enter or press
the soft key under the input)
13. ****Be advised STLR is ALWAYS set to RTD and 0-350F range. DO NOT change this****
14. ****Be advised SFLR is ALWAYS set to mA input type and cannot be changed****
15. CPR and HWC can scroll to Input Type
a.
Press MOD
b.
Select either RTD or mA
c.
Press ENTER to save
Changing Chart Tag

Programming Inputs

2