ANDERSON-NEGELE MPI-200 Informasi Produk - Halaman 6

Jelajahi secara online atau unduh pdf Informasi Produk untuk Adaptor ANDERSON-NEGELE MPI-200. ANDERSON-NEGELE MPI-200 8 halaman. Programming adapter

C O N T R O L S

Printing and/or exporting parameters

Depending on the activation of a button in the button bar (see also page 3) or using the submenus described below, the

parameter settings can be printed out in a list, duplicates of the list can be created or the parameter data of a sensor can be

saved and copied to other identical sensors.

Submenu items

1: Print the parameter list directly

2: Save parameter data set on the PC

3: Load the saved parameter data set

from the PC to the sensor

Selection options

In the next step in each submenu, you

can select which parameter families

should be saved or printed (1.).

Additional input fi elds are available (2.)

to assign a parameter list or a data set

to a particular sensor/unit.

The serial number is a mandatory fi eld;

all other parameters are optional.

These optional fi elds show the informa-

tion of the sensor that was processed

last. Unless this information is changed

or deleted, it will also be printed out

and saved.

After the language and the printer are

selected in the option fi eld (3.), the

process can be completed by clicking

the "OK" button.

Export function of the parameter list

After the print menu is opened and the corresponding data are entered, a paper printout can be created.

To make sure you always have a copy of the parameter settings available in the form of a list (e.g. for quality assurance), it is

recommended that you save the parameter list in .xml format in addition to printing it out.

Export/import of the parameter list

The import and export function can be used to load parameter settings onto another, identical device. This function can be

used to store parameter data sets externally on the PC and to load them again when needed.

Information

The exported xml fi le can be saved locally on the PC or on a server and can be distributed/sent by e-mail or USB stick.

This does not require special database or programming knowledge. The data is saved in the Microsoft Windows direc-

tory structure. The default fi le name depends on the entries in the serial number and TAG number fi elds. However, it can

be changed or expanded manually if required. This import function can be used to load the xml fi le and upload it onto a

sensor.

Calling up submenus

Selection options/input ﬁ elds

Printing/exporting the parameter list