Dreamline Elegance Panduan Petunjuk Instalasi - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Produk Pipa Dreamline Elegance. Dreamline Elegance 14 halaman. Shower door
1. After opening the boxes, read this introduction carefully, check all the packed parts are
complete by cross checking all the components against the "Detailed Diagram of Shower
Door Components". Examine for shipping damage. If the unit has been damaged, has a
finishing defect or has missing parts please contact your local distributor within 3 business
days. Please note that Bath Authority
product or missing parts free of charge after 3 business days or if the product has
been installed. Contact your distributor or DreamLine if you have any questions.
2. Please note that you should consult your local building codes on questions on
installation compliance standards. Building and plumbing codes vary by location,
and DreamLine is not responsible for code compliance standards for your project.
3. Please insure that prior to the installation the floor is leveled and solid. Also make sure the
walls are at right angles. While some adjustment in leveling of the door is possible, irregular
floor level or improper angle of side walls will result in serious problems for your installation.
Please, note that there are some adjustments, cutting and drilling might be necessary
during the installation process.
Caulk
Level
Rev. 1 .5
Preparation
TM
Tools Required
Tape
Measure
Pencil
Caulk
Gun
TM
/ DreamLine
will not replace any damaged
Drill bit
Drill bit
(D=6mm)
(D=3mm)
Phillips
Electric
Screwdriver
Drill
Hammer
2