Dreamline ENIGMA-Z SHDR-62607610 Series Panduan Petunjuk Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Produk Pipa Dreamline ENIGMA-Z SHDR-62607610 Series. Dreamline ENIGMA-Z SHDR-62607610 Series 20 halaman. Shower door & tub door

Halaman Cetak

The Guide block (#12) should be centered on the threshold, not the stationary panel glass.

In preparation for dry fitting the Stationary glass panel (#02), Upper Guide rail (#03), Anti-splash

threshold (#15) and Guide block(#12), use the Guide block (#12) as a reference to mark the wall and

base on the stationary panel side where the stationary panel glass will be installed.

TIP: use the guide block for

reference when positioning

your stationary glass on the

threshold.

Place the Stationary glass (#02) onto the

threshold or tub deck aligned with the marks made in

step #4 and butt it up against the wall.

Note: The Upper Guide rail (#03) should be on the

inside of the Stationary glass (#02).

Dry fit the Guide block (#12) and the Anti-splash

threshold (#15) into place at this time to mark their

positions on the threshold.

Make sure the Stationary glass (#02) is plumb and

the Guide rail (#03) is level. Adjust the Guide rail

(#03) for level by using the

Rotate the elliptical adjustment disk on the outside of

the Glass bracket (#07), and then re-tighten the bolt

while holding the adjustment disk in place.

ENIGMA-Z manual Ver 1 Rev 4 10/2016

Glass brackets

(#07).

See Fig. 6 for details

Fig. 5

See Fig. 5 for details

Fig. 6