Andesfit Health ADF-B27A Panduan Pengguna - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pengukur Glukosa Darah Andesfit Health ADF-B27A. Andesfit Health ADF-B27A 18 halaman.
Halaman Cetak
Blood Glucose Meter
1
2
3
1
STRIP PORT
Where you insert the test strip. The meter will turn on
automatically
2
STRIP EJECTOR
Slide forward to eject the test strip after test
LCD DISPLAY
3
It guides you through the test using symbols and simple
messages
4 "M" BUTTON
It is used to turn on the meter, enter the memory mode
"S" BUTTON
5
It is used to set up the meter
Test Strip
Each strip can be used only once. The test strip consists of the
following parts:
4
5
Test results might be wrong if the contact
Bar is not fully inserted into the test slot.
The front side of the test strip should face
up when inserting the test strip.
Absorbent Hole
Apply a drop of blood here. The blood will be
drawn in automatically.
Confirmation window
This is where you confirm if enough blood has
been applied to the absorbent hole of the strip.
Test Strip handle
Hold this part to insert the strip into the slot.
Contact bars
Insert this end of the test strip into the meter.
Push it in firmly until it will go no further.
Attention!