ATIM Cloud Wireless DINDA Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori ATIM Cloud Wireless DINDA. ATIM Cloud Wireless DINDA 19 halaman. Analog sensor reading

Halaman Cetak

Modem configuration

Download and install the configuration software '' setupACW.exe '' at:

http://www.atim.com/produit/atim-cloud-wireless-acw/

Connect the module to your computer with a USB cable then launch the software, do not forget to supply

the ACW_RS in 10 / 30V.

When you connect the module, the software window changes to allow you to access the main features.

Automatically, the current configuration of the connected module is retrieved and displayed.

The different configuration modes are described below. Once the configuration is the one you want, you just

have to click on the

Write

the module update succeeded or failed.

Note

It is in this phase that the module is updated with the time of your PC.

Once the configuration is complete, do not leave the module connected to USB. This mode of

operation is very energy intensive. When you remove the USB link without disconnecting the

battery, the module automatically returns to normal operation. At power up, 5 test frames are

emitted every minute to validate the operation.

key. After a few seconds of waiting, a message appears next to it to inform you if

ATIM_ACW-DINDA_UG_FR_v1.5