ComNav Technology K801 Panduan Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Unit Kontrol ComNav Technology K801. ComNav Technology K801 9 halaman. Oem board
Halaman Cetak
K8-series OEM Modules Commands Guide
2.8 Setup APPSCENE
Set navmode param1
2.9 Ecutoff
ECUTOFF <cutoff-angle>
This command sets the elevation cut-off angle for tracked satellites. The board does not start automatically
searching for a satellite until it rises above the cut-off angle. Tracked satellites that fall below the cut-off angle are
no longer tracked.
2.10 RTKTIMEOUT
RTKTIMEOUT <time-delay>
This command is used to set the maximum age of RTK data to use when operating as a rover station. RTK data
received that is older than the specified time is ignore.
2.11 RTKFIXHOLDTIME
RTKFIXHOLDTIME <time-delay>
This command is used to set the maximum age of RTK fixed data to use when operating as a rover station. RTK
fixed data received that is older than the specified time is ignored.
//setup application scene
Param1
Normal
Fitness
Stationary
Drone
Swimming
Bike
//Set satellite elevation cut-off angle (-90 ~ 90 degrees)
// time-delay: less than 1200s, default 200s
// time-delay: less than 1200s, default value is 200
Description
Normal
Dynamic
Static
Drone
Swimming
Bike