Comnet CNGE24FX12TX12MSPOE Panduan Memulai Cepat - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Router Jaringan Comnet CNGE24FX12TX12MSPOE. Comnet CNGE24FX12TX12MSPOE 8 halaman. Industrial grade managed ethernet switch w/ 12 x 100/1000base-fx + 12 x 10/100/1000base-tx ports w/ optional 30w poe
Halaman Cetak
QUICK START GUIDE
Safety Information
» Only ComNet service personnel can service the equipment. Please contact ComNet Technical
Support.
» The equipment should be installed in locations with controlled access, or other means of
security, and controlled by persons of authority. When operating at temperatures above 51º C, the
equipment surfaces will be hot to the touch. Installation in restricted access location is required
for this case.
» For POE models requiring a power supply not labeled LPS, the unit should be installed in a
restricted access location using a 60950-1, 2nd Edition + Am. 1 + Am. 2 Certified power supply
rated for the ambient temperature in which it is installed. Total derated power rating should be
greater than the sum of the attached loads plus 30 W for the switch.
» Use CDRH compliant SFP modules when using fiber connectivity with this device.
» When used in Australia or New Zealand, the product is certified for intra building applications
only, and should not be directly connected to network cables with outside plant routing.
Hardware Installation
Rack mount kit assembly
You can find the rack mount kit and the screws in the packing box. Please assembly the rack
mount kit on the switch with screws as shown below:
TECH SUPPORT: 1.888.678.9427
CNGE24FX12TX12MS[POE]
QSG_CNGE24FX12TX12MS[POE] Rev. 2.22.18 PAGE 4