Comnet netwave NWK3 Panduan Pengguna Mulai Cepat - Halaman 2
Jelajahi secara online atau unduh pdf Panduan Pengguna Mulai Cepat untuk Router Jaringan Comnet netwave NWK3. Comnet netwave NWK3 8 halaman.
Halaman Cetak
Quick start user Guide
FIGURE 1 – NEtWavE accEss poINt
INsIde Bottom CompartmeNt
View DeSCRiPTiON
1
Status Indicating lEDs – See Figure 2 for lED Indications.
2
lAN Port – 10/100mbps Ethernet and PoE input connection. Range: 12V to 24V DC
3
Surge Protection (optional) – Connect ground wire to earth point.
Reboot: Press Button once
4
Reset Button
Reset Password: Press and hold Button for 5 Seconds, then Release.
Restore Factory Settings: Press and hold Button for 8 Seconds, then Release.
FIGURE 2 – statUs LED INDIcatIoNs
LeD
POweR
eTHeRNeT LiNK
RSSi1
RSSi2
RSSi3
RSSi4 / STATUS
sIgNal streNgth:
mINImum sIgNal
tech suPPort: 1.888.678.9427
3
2
1
ViSUAL CUe
iNDiCATiON
SolID GREEN
Power is supplied to the NW3/NW4
oFF
No power is supplied to the NW3/NW4
SOLiD GReeN
Ethernet connection is established
FLASH GReeN
Ethernet connection is established and there is activity present
oFF
No Ethernet connection established
SolID RED
Poor signal strength
SolID YElloW
Acceptable signal strength
SolID GREEN
Good signal strength
FlASh GREEN
Unit is booting up
SolID GREEN
Excellent signal strength
4
maXImum sIgNal
INS_NW3_NW4_QS_REV– 04/23/13 PAGE 2
NW3/NW4