Comnet RELIANCE RLGE2FE16R Panduan Memulai Cepat - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Beralih Comnet RELIANCE RLGE2FE16R. Comnet RELIANCE RLGE2FE16R 18 halaman. Substation-rated, enhanced security scada-aware ethernet layer 2 managed switch/layer 3 router with optional 2g/3g & 4g lte cellular radio link, enhanced network security, terminal server, poe+, and 100fx sfp ports

Halaman Cetak

QUICK START GUIDE

RLGE2FE16R

take care to notice the label on the back of the module.

For the DC version there are 2 connection inputs, marked as "PWR A" and "PWR B". For proper

operation it is only necessary to connect one power source, either to "PWR A" or to "PWR B".

However, for redundancy purposes you may connect 2 different power sources one at "PWR A"

and the second to "PWR B".

For wiring the voltage an opposite plug connector (2 pcs) is supplied.

Wiring AC Input voltage connector

For an AC product variant there is a single input connector.

Use a Brown wire for the Line (Phase) conductor, a Green/Yellow for the grounding and a Blue wire

for the Neutral conductor. Use 18AWG (1mm2) wire, with insulated ferrules.

TECH SUPPORT: 1.888.678.9427

QSG_RLGE2FE16R_REV– 3 Aug 2016 PAGE 8